|
include("leftside.php"); ?>
|
|
|
Full
Duplex Multiplexer
16 channel!
Features
- Compatible
with color and B/W video cameras or other NTSC/EIA
(PAL/CCIR) standard compatible video sources.
Video synchronization is not required. Selectable
termination
- Full
duplex operation allows video recording while
viewing live video or video playback.
- Dynamic
Time Division multiplexing allocates camera
recording time based upon picture motion content.
- Motion
sensing for each camera input is programmable
via a 192 motion target grid (16 wide by 12
high)
- Independent
Main and Call Monitor outputs allow simultaneous
multicamera and full screen viewing.
- Video
inputs and outputs provided for both standard
and Super VHS video cassette recorders.
|
- On-screen
display includes date, time, alarm status, video
loss and 10-character camera titles.
- Live
or tape playback views includes: full-screen
with 2x zoom, Picture-in-Picture (PIP), 2x2,
3x3, and 4x4.
- SELECT
feature allows any camera to be assigned any
window format.
- Outstanding
picture quality provided by a 512 x 464 (512
x 512 PAL) pixel display with 256 gray levels
and 16 million colors.
- On-screen
menus simplify system setup.
- Alarm
features include one contact closure and TTL/CMOS
sensitive alarm input for each camera, alarm
hold input and alarm output. Alarm input polarity
is selectable.
- Nonvolatile
program memory protects all programmable features
against power loss.
|
Specs
| Camera
Inputs/Output: |
1.0
V p-p, 75 Ohms |
| VCR
Inputs/Output: Composite |
1.0
V p-p, 75 Ohms |
| VCR
Inputs/Output: S-video: |
Luma
1.0 V p-p, 75 Ohms Chroma (burst) 285m V p-p, 75
Ohms |
| Camera
Alarm Input: |
One
input per camera. Activated by contact closure or
TTL/CMOS signal. Polarity Selectable. |
| Alarm
Hold Input: |
+5
to +15 VDC or TTL/CMOS Active High signal. |
| Alarm
Duration: |
4
second default. Menu selectable from 2 to 999 seconds. |
| Alarm
Output: |
Normally
open (NO) and normally close (NC) contacts with
shared common: 2.0 A at 30 VDC (resistive only)
1.0 A at 125 VAC (resistive only) |
| Gray
Shades: |
256
(8 bits) |
| Full
Screen Format (pixels): |
512
x 464 (512 x 512 PAL) |
| Power: |
2.1
mm pin-type female. Power Input. |
| Remote: |
DB25-S.
Remote control via contact closure, TTL/CMOS or
RS-232 data. |
|
PSC-MLTPX16----16
channel B&W/Color multiplexer $599.55
|
|