Network IP Camera

Our IP cameras are the strongest IP cameras made, with heavy gauge steel and MPEG4 video compression. This is the best combination for professional environments. Use multiple network cameras at one location. A simple click of the mouse at your computer will pull up the camera video as well as the audio. Through this interface you can also set the motion detection areas, the notification method(s), user privileges, and other settings. The user privileges allow controlled access of the video signal and/or settings. A user can be granted access only to view a camera, to view and record, or to do all those and administer the camera also. Logging in can also be turned off so that anyone can simply type in the IP address be viewing the camera. The unit can be set to email you snapshots of the video signal when motion is detected or to upload these snapshots to a server via ftp when motion is detected. These actions can also be set to be done on a schedule, an interval, or any combination.

The included software allows you to view the any/all of the cameras behind your router from any other computer behind that same router. To view the cameras from a computer not on your network, you will need the remote viewing/recording software (optional). Using this software, you can view up to 16 cameras at one time. These cameras need not be at the same physical location--each camera can be anywhere in the world.

The lens can be changed. Most manual-iris cs-mount lenses will fit. All lenses from Optiview are compatible including varifocal lenses. A 6mm lens comes standard.

• Built in web server
  
• 30FPS per camera
  
• Audio support
• Multiple motion detection areas with individual sensitivity settings
  
• Motion detection, Scheduled, or event recording
• Email and/or FTP snapshots on event, regular schedule, or motion detection
  
• Time stamp and text overlay
  
• CS-Mount interchangeable lens
  
• 1 sensor input, 1 relay output
  
• Compatible with ourIP recording software
• Included software allows viewing and administration of up to 4 cameras from any computer connected to the internet

PSC-NETCAM----$499.85

Video Server

This video server allows audio and video input from any existing camera. Features MPEG4 video compression and real time video transmission. It is the same as the Network Camera above, but allows you to use any camera you wish.

Our IP cameras are the strongest IP cameras made, with heavy gauge steel and MPEG4 video compression. This is the best combination for professional environments. Use multiple network cameras at one location. A simple click of the mouse at your computer will pull up the camera video as well as the audio. Through this interface you can also set the motion detection areas, the notification method(s), user privileges, and other settings. The user privileges allow controlled access of the video signal and/or settings. A user can be granted access only to view a camera, to view and record, or to do all those and administer the camera also. Logging in can also be turned off so that anyone can simply type in the IP address be viewing the camera. The unit can be set to email you snapshots of the video signal when motion is detected or to upload these snapshots to a server via ftp when motion is detected. These actions can also be set to be done on a schedule, an interval, or any combination.

The included software allows you to view the any/all of the cameras behind your router from any other computer behind that same router. To view the cameras from a computer not on your network, you will need the remote viewing/recording software (optional). Using this software, you can view up to 16 cameras at one time. These cameras need not be at the same physical location--each camera can be anywhere in the world.

Connecting any camera to our Network Server will give you an IP camera.

• Built in web server
  
• 30FPS per camera
  
• Audio support
• Multiple motion detection areas with individual sensitivity settings
  
• Motion detection, Scheduled, or event recording
• Email and/or FTP snapshots on event, regular schedule, or motion detection
  
• Time stamp and text overlay
  
• CS-Mount interchangeable lens
  
• 1 sensor input, 1 relay output
  
• Compatible with ourIP recording software
• Included software allows viewing and administration from within your network (behind the same router)
• Additional software required for remote (outside of your network) viewing and recording.

PSC-NETSERV----$359.65

Network Server with PTZ Support

The Network Server with PTZ Support is our network server as described above, but has PTZ support built right in.

Our network servers are the strongest IP cameras made, with heavy gauge steel and MPEG4 video compression. This is the best combination for professional environments. Use multiple network cameras at one location. A simple click of the mouse at your computer will pull up the camera video as well as the audio. Through this interface you can also set the motion detection areas, the notification method(s), user privileges, and other settings. The user privileges allow controlled access of the video signal and/or settings. A user can be granted access only to view a camera, to view and record, or to do all those and administer the camera also. Logging in can also be turned off so that anyone can simply type in the IP address be viewing the camera. The unit can be set to email you snapshots of the video signal when motion is detected or to upload these snapshots to a server via ftp when motion is detected. These actions can also be set to be done on a schedule, an interval, or any combination.

The included software allows you to view the any/all of the cameras behind your router from any other computer behind that same router. To view the cameras from a computer not on your network, you will need the remote viewing/recording software (optional). Using this software, you can view up to 16 cameras at one time. These cameras need not be at the same physical location--each camera can be anywhere in the world.

• Built in web server
  
• 30FPS per camera
  
• Audio support
• Multiple motion detection areas with individual sensitivity settings
  
• Motion detection, Scheduled, or event recording
• Email and/or FTP snapshots on event, regular schedule, or motion detection
  
• Time stamp and text overlay
  
• CS-Mount interchangeable lens
  
• 1 sensor input, 1 relay output
  
• Compatible with ourIP recording software
• PTZ Support
• Included software allows viewing and administration from within your network (behind the same router)
• Additional software required for remote (outside of your network) viewing and recording.

PSC-NETPTZ----$419.35