Connects directly to time lapse VCR event video recorder or any VCR with alarm inputs to record on motion. Equipped with N/O and N/C terminals.
Using this device, you can trigger an alarm input on a security system, VCR, DVR, etc., by motion on a camera. Simply connect the cable from your camera into the video in on the sensor and then connect the video out to whatever device you're recording onto. Then, interface the sensor to your alarm device by connecting 2 wires to either the normally open (N/O) or normally closed (N/C) terminals on the sensor and on your alarm device. You're done. Whenever there is motion on your camera, the alarm circuit will be triggered.
This unit can connect between a single camera and VCR, or...
More
>>