|
Digital
8mm Alarm Event Recorder*
This alarm event recorder can record 180 events on a
standard 8mm video cassette. The system can be used
with any combination of the sensors listed below .This
system is enclosed with our standard Hardigg waterproof
case and can be located up to 65 feet from the camera.
With the standard battery, this system will run for
21 days unattended with a single camera. Additional
battery packs or solar cells may be added to increase
runtime.
The standard Digital 8mm Alarm Event System includes:
- Waterproof
Hardigg case
- Sony
Camcorder
-
Spread Spectrum receiver controller
- Color
or B&W bullet cameras
- 2
sensors (your choice)
- 28
amphour battery
- one
weather resistant color camera
- one
year warranty

PSC-Probe
Magentic
Presence Sensor OS-MAG The magentic presense sensor
is designed to detect vehicular traffic the size
of ATV or larger. It is best installed buried
in the middle of a road or simply placed in a
ditch bank along side of the road. For roads wider
than 14 feet, it is recommended that a sensor
be placed on either side of the road. These sensors
are completely waterproof and transmit via spread
spectrum to the alarm recorder as needed. Transmission
distances for the sensor is from 100 to 2500 feet
depending on site conditions and depth of cover.
The batteries in these units typically last 6
to 8 months.
|

PSC-PIR
PIR
Interlocked Sensor OS-PIR The PIR (Passive Infra-Red)
interlock sensor has been optimized for vehicular
detection. While other PIR sensors false on wind
gusts and wildlife, our sensor double checks for
the presence of vehicluar sounds. This sensor
is weather resistant and intended to be mounted
on the side of a tree chest high up from 100 to
2500 feet from the recorder. The sensor can typically
be placed 20 to 30 feet off the side of the road.
The batteries in these units typically last 8
months.
|
|